Contact Us
 

 

To contact us,please use the email link below.

Please include all your order information requested on our

                                             "shipping page"

 

Email Us:
infonj@iendeavor.com

 

Click here for How to Order and Policy information

Thank you

 

 

 

 

 

About Us

  We are a custom jewelry studio that creates museum quality reproduction German World War II jewelry.We use only the very best industry standard,certified pure .925 Sterling Silver casting grain to make our rings.Many of the rings you find elsewhere on the internet claim to be silver and thats the trick.They advertise as silver,not Sterling Silver.This allows them to use a very low silver content in their jewelry that is high in other metals such as copper or some of the other white metals like pewter,tin,lead,etc.The rings they sell will look dull gray,be very soft and make a dull sound instead of a jingle when dropped.Usually they will turn your finger black or green.They also mass produce these rings and when they are ready for finishing they all get dumped in a tumbler and are finished that way.We do our finish work by hand on each and every piece.If you are looking for a quality ring be sure to ask first before paying for it, if it is in fact Sterling Silver.Most of these cheap rings are coming out of Poland and some of the Baltic countries.They sell for less than our rings,as the poor quality of metals they are using allows them to do so.The cost of Sterling Silver has been rising steadily over the past few years and is projected to continue doing so.The quality and detailing of most of these imported rings is lacking.If you notice just about every site selling this kind of jewelry all claim museum quality,etc.Its easy to say this is so,yet the proof is always evident once you receive your purchase.There is a lot of junk out there being sold and its best to follow the advise of the old term "buyer beware".
We have a particularly strong interest in German World War 2 SS Totenkopf Honor Rings.As to the best of my knowledge we were the first online site to offer Honor Rings using the correct 2 piece assembly as per original manufacturing procedures.
A very large percentage of our customers who purchase the Honor ring from us email us upon receiving their ring with praises of the quality and historical accurateness of our rings.Many of our customers have bought SS Totenkopf Honor Rings elsewhere and were not pleased with what they received.Using special molding techniques enables us to cast our jewelry virtually without any shrinkage to the finished piece.Thus the final result is heavier thicker bands and correct proportions to the rings height and weight.Some of our custom rings offer a solid rather than hollow face inside the ring.You wont find these rings on any other sites.
  We receive many testimonials from satisfied customers.Many of our customers come back to purchase more of our jewelry, trusting in our products,knowing they can count on getting the high quality jewelry they are looking for.We dont order these rings elsewhere for resale to you.They are cast and hand finished to perfection right here at our studio.Be sure to click on either the Shipping button to the left of the page in the menu or the purchasing information link towards the top of the page for Purchase,shipping and policy information.
We do not accept orders over the telephone.

 

 

Custom Work

We love to do Custom Work.Although it can be very expensive to design and make.It is a very long process to get to where you have a finished ring in your hand or should I say on your hand.The process begins with your concept and getting your design sketched out.Next the rough drawings will be submitted to a company that is able to recreate your drawing into an actual 3 dimensional wax model.The wax is first sent to you for your approval , then the wax is sent to me for final approval.After that,I make a mold and then we cast the original wax model and a couple of extra copies in case of casting flaws being present on 1 of the casts.The ring photos below are of a Custom Ring I just finished for a customer of ours.It is the largest ring I have ever seen.It is 60.25 grams of Argentium Silver.Underneath and around the SS Totenkopf is a piece of rare "Absolute Black Jade"The skull is mounted a post and has been pined through a 1/8" hole in the center of the Jade.There is a Latin inscription around the stone work that translates "Crush The Weak" I didnt keep track of how much money it cost my customer.I do know that the wax itself was $500.00 to have cut.I imagine its close to $800.00 worth of designing work,wax model,Argentium Silver,Black Jade and my labor to put it all together.If you are interested in something special and have some ideas,feel free to contact us.

Thank you,Nazijewelry.com

 

 

 

                                                                                                                                   

 

 

 

 

 

 

 

 

 

 

COMING SOON

1936 SS Chained Officers Dagger

If you are like us , you would really like to own an original one of these rare beauties.Unfortunetly most of us cant afford the ten thousand dollar price tag that comes with it.We have bought several of the supposed high end reproductions and they were worthless.We wanted something that not only looked real but felt real in your hand.There have been some fakes made in Russia that are very convincing , however these are being sold as originals to unwary collectors.Since we couldnt find a good repro at an affordable price and cant afford the big bucks for a real one or a "fake" being sold as a real dagger , we have partned with another friend to create the ultimate SS Chained dagger.We are still in the early stages but will soon have our first prototype made up.We have been acquiring quite a few original parts to use for our molds.

Here is the description of our new dagger and what it will consist of :

The upper , middle and lower scabbard fittings , removable scabbard throat with metal blade runners , The upper & lower crossguards , The pommel nut , eagle handle insert and SS Runes handle insert , the complete chain assembly - 2 piece clip Assman & RZM marked , Type 1 cloverleaf , Type 1 Skull and SS Runes Links with proper stamp to one SS Runes link on reverse side and link connectors.All these parts will be cast in solid German silver from original WWII era parts.They will be cast using the same material the early SS Daggers were made from.

The dagger will have a steel scabbard shell and all the fittings and scabbard throat will be screwed to the scabbard with correct screws.The blade runners will be correctly riveted to the throats.The handles are made of solid  black ebony wood with precise routering for grip inserts.The blades are high quality steel with the proper etchings and Solingen Germany marked.At this point we have decided to go with original SS Scabbards with original scabbard fittings except for the center Swastika fitting which will be molded from an original that cost us the really big bucks.So this repro dagger will not be entirely a reproduction.Many of the parts will be actual war time manufactured.Therefore making this dagger not only a reproduction but also a Post War original parts dagger.This is going to be made in limited quantities due to the extreme levels of labor involved and of course the limited number of original parts we are able to purchase.Right now we have several original scabbards and scabbard fitting which will be used on the first daggers that we sell.As long as we can continue to get original scabbards we will continue to offer them with such.Once the scabbard supply dries up,we will begin producing these beauties with reproduction scabbards.So those of you first in line will get the real wartime good stuff.We are really excited and must admit we started this project with only the thought of making 2 daggers for my partner and I.Then it became apparent that others like us were dying to get in on the action.We are hoping to have our first prototype finished in about 1 to 2 months now.Let us know if your interested and we will take a deposit to get you in line.Remember first 3 or 4 in line will be getting the original scabbards.There is not going to be anything cheap about these daggers and the parts will really show it.Right now we are figuring about $1000.00 with the original parts scabbards included.I know it sounds high but if you go out and start pricing out everything , you will see it adds up fast for just the original parts involved.Then everything else we cast here in german Silver.This is a very labor intensive project and is not just slapped together.Everything must fit perfect.No flaws.great for the really serious reenactors.

 

 

 

 

 

 

Back to top of page                  Back to Home Page

 

Copyright (c) 2002. Nazijewelry.com